Hopper Loader
-
Colortronic CSR-45
Manufacturer: Colortronic
Model: CSR-45
Description:
Colortronic vacuum receiver
- 1.6 cu. ft. capacity
- 24 Vdc
- 2.5" in/out
- Gravity discharge
|
Dryer
-
Conair Hot Air Dryer
Manufacturer: Conair
Model:
Description:
Conair Hot Air Dryer
24KW Blower 2HP - 680 CFM
Model 18010902
Serial# 114813 Rev.#051736L020/0201
480V, 3 PHASE 60 Hz
|
Calibration table
-
Conair model DSC-20-10
Manufacturer: Conair
Model:
Description:
Calibration Table from Conair 20 ft long / Stainless Steel Construction
-Power Supply 600/3/60
-Compartments: First – Dry Section - 38 inches long x 30 inches with tooling mounting rails, Second – 48” inches long with spray or flood cooling and vacuum, Third & Fourth – each 72” inches long with spray or flood cooling and vacuum Fifth – 10 inch long air wipe with air distribution bars (2).
-Pumps : 2 x 7.5 hp liquid ring pumps for manfiolds and 1 x 10 hp liquid ring pump for the tank chamber
|
Grinder
-
Cumberland 8x10
Manufacturer: Cumberland
Model:
Description:
Used Grinder Cumberland 8x10
-5 HP
-575/3/60
-2 x Fly knives
-2 x Bed knives
|
Extruder
-
Danson Hartig 3.5" 24/1
Manufacturer: Danson Hartig
Model: Danson
Description:
Danson Hartig extruder
-3.5" 24/1 L/D
-Water cooled
-75HP, 60RPM
-460/3/60
-4 Barrel Zones, 6 Die zones,
|
Extruder
-
Davis-Standard 3.5" 20/1
Manufacturer: Davis-Standard
Model: 350 20-1
Description:
Davis-Standard extruder Thermatic III
-3.5" 20/1 L/D
-Air cooled
-50HP, 60RPM
-460/3/60
-4 Barrel Zones, 2 Die zones
-Double swing bolted clamp
|
Extruder
-
Davis-Standard 3.5" 20/1
Manufacturer: Davis-Standard
Model: 350 20-1
Description:
Davis-Standard extruder Thermatic III
-3.5" 20/1 L/D
-Air cooled
-50HP, 60RPM
-460/3/60
-4 Barrel Zones, 2 Die zones
-Double swing bolted clamp
|
Extruder
-
Davis-Standard 3.5" 24/1
Manufacturer: Davis-Standard
Model: 350SII F-7299
Description:
Davis-Standard extruder Thermatic III,
-3.5" 24/1 L/D
-75 HP, 100 RPM
-460/3/60
-Air cooled
-5 barrel zones, 3 die zones
-Double swing bolted clamp
|
Extruder
-
Davis-Standard 3.5'' 24:1
Manufacturer: Davis-Standard
Model: DS-35
Description:
Davis-Standard Extruder 3.5''
Year of Manufacturing : 1987
-3.5'', 24:1 L/D
-Air cooled
-50HP, 60RPM
-460/3/60
-''C'' clamp
|
Extruder
-
Deltaplast Co-Extruder
Manufacturer: Auxiplast
Model: EXTR0007
Description:
Deltaplast Co-Extruder 1.5'' 24:1 575/3/60
|
Dust Collector
-
Dust collector for silo
Manufacturer: Auxiplast
Model:
Description:
Dust collector for silo, designed for powder
-Painted steel construction
-Includes 6 anti-static cartridge filters
-Blowback cleaning system
|
Extruder
-
Gearbox Wilson
Manufacturer: Auxiplast
Model: MISC0077
Description:
NEW Wilson Gearbox for extruder
- 75HP 34:1 gear ratio
|
Grinder
-
Granulator
Manufacturer: Auxiplast
Model:
Description:
USED GRANULATOR 1993 (APPROX) 1500LBS/HR, INCLUDING 2 SET OF SPARE KNIVES (10 FLY, 4 BED) 1 SPARE SCREEN 5/16 HOLE , 25HP MOTOR, PROFIL CHUTE + BULK CHUTE/WELDED METAL PLATE
|